Features

The ND-type flow sensor has the measuring principle of impellers and is suitable for measuring various types of liquid. It is one of our best-selling products with high quality at a low price.

・Excellent repeatability
・Amplifier built-in magnetic sensor, which is strong against noise, operates in proportion to the flow velocity.
・Pulse output by open collectors.
・Measures a wide range of flow rate with high accuracy.
・Simple structure due to the tangential flow impeller method employed as a measuring principle.
・Capable of measuring various liquids.
・CE certified product
・RoHS compliant (Complies with the RoHS directive to address the environmental issues.)

Standard specifications (ND05-NATAAC - ND10-NATAAA)

Model		ND05-N ATAAO	ND05-P ATAAO	ND05-T ATAAA	ND10-N ATAAA
Flow rate range		0.3 – 3.0 L/min			1.5 – 20 L/min
Accuracy		±2%RS (In the standard installation position)
Measurable liquid		Types of measurable liquid (Please decide based on the major materials exposed to fluid, which are described below.)
Maximum operating pressure		1MPa (When the liquid is at 20°C)
Pressure loss		12 kPa or less (at 3 L/min)			20 kPa or less (at 20 L/min)
Range of liquid viscosity		0.5 – 1.5 mPa・s (Water equivalent)
Fluid temperature range		0 to + 70℃	0 to + 60℃		0 to + 70℃
Responsiveness		-10 to +70℃ 35 to 85%RH (No condensing)
Output signal		Open collector pulse, 4-wire Length of wire: Approx. 600 mmDuty ratio 3/7 < A/B < 7/3
Pulse constant		2.5 mL/P			7.69 mL/P
Maximum frequency		20Hz			Approx. 44Hz
Minimum pulse width		0.015s			Approx. 0.007s
Applied voltage range		3 – 24VDD
Power consumption		0.2 VA or less
Structure		Splash-proof structure (IP64 compatible) for indoor use
Connection		R1/2
Mass		Approx. 150g			Approx. 120g
Major materials of the part exposed to liquid	Case	Denatured PPO	PP	ETFE	Denatured PPO
	Impellers	POM		ETFE	POM
	Pivot	SUS304	PA	ETFE	SUS304
	O-ring	NBR	FKM		NBR
	Magnet	Sa-Co *			Ba-Fe

Standard specifications (ND10-PATAAA - ND20-PATAAA)

– ND05-TATAAA and ND10-TATAAA should only be installed in the standard installation position.
*1. Apply the same voltage to the sensor power supply (red – black) and pulse output (blue and white – black).

*2. This magnet is not exposed to liquid.

Dimensions

(Unit:mm)