ADVANCED SERIAL SYSTEM FOR GAS TURBINE AIR INTAKE Ecoserial C3, Autel Vietnam, Aeautel Vietnam
Xuất sứ: Italy
Nhà cung cấp: Pitesco
Hãng sản xuất: Aeautel
Mr HaADVANCED SERIAL SYSTEM FOR GAS TURBINE AIR INTAKE
Ecoserial C3
The most complete, flexible, versatile and advanced controller for the management of large plants.
The Ecoserial C3 is a device created for the management of the most complex and articulated Gas Turbine air intakes filters. The controller commands new generation pneumatic pilot boxes, called RPA-612..
Ecoserial C3 has three serial port RS485 isolated and independent, to which it is possible to connectup to 64 RPAs, and a PLC for data monitoring.
The user can manage the clearing cycle “in situ”, or rather directly on the interface panel Ecoserial C3 or with a remote
system, through line RS485 with protocol Modbus.
MAIN STRENGTHS:
- 2 Cable only to control the whole filter house.
- RS485 MODBUS communication from Remote boxes and controller.
- Internal clock for temporized cleaning.
- Leakage detection and automatic module isolation
- Input for Humidity sensor management.
- Fully Customizable cleaning sequence.
- Internal differential pressure gauge.
- System integration with Modbus RS485 RTU
| Main Features | Features | Values |
|---|---|---|
| Dimensions | External Dimensions ( L x H x W mm ) | 156x175x70 |
| Weight (kg) | 550g | |
| Protection | Protection Level (standard) | Non disponibile. Forniremo solo scheda elettronica Not available. It will be supplied just the electronic board |
| Temperature | Working Temperature (°C) | -20...+60 vers.CE (OPT -40°C), 40... +65 vers. UL |
| Power Supply | Power Supply Range (standard) | 90-270Vac 50-60Hz |
| Power Consumption | 10W | |
| Display | Display Type | LCD |
| Resolution | 128x64 | |
| Display Color (standard) | yellow-green | |
| Inputs | Digital Inputs (nr) | 4 opto-isolated inputs |
| Pressure Input | ok | |
| Pressure Range | 0/+9999mmH2O, 0/+9999Pa, 0/+9.999kPa, 0/+99.99mBar | |
| Analog Input | optional | |
| Outputs | Relay Outputs (nr) | 4 |
| Relay Output Power | 8A/270Vac | |
| 4-20mA Output | optional | |
| Functions | Internal clock for temporized cleaning | ok |
| Input for humidity sensor management | ok | |
| Fully customizable cleaning sequence | ok | |
| Cyclic Management | ok | |
| Delta Pressure Management | ok | |
| Customizing Cycles | ok | |
| Remote Start/Stop | ok | |
| Autopause | ok | |
| Post-cleaning | ok | |
| Cleaning cycle | ok (custom) | |
| Coils can be activated simultaneously for each output (nr) | 128 | |
| Broken Coil Control | ok | |
| Broken Valve Control | ok | |
| Pressure Tank Control | ok | |
| Serial Ports | RS485 | ok |
| System | Maximum Driver Managed | 64 RPA |
| Type | MASTER | |
| Type of driver connectable | RPA | |
| Type of control driver | SERIAL | |
| Controls | Buttons (nr) | 4 |
| Application | Type | Gas Turbine air intake |
